The number of products found ( 49)

  • Unshaped refractories: (17)
  • Shaped refractories: (32)

Unshaped refractories

1

Matrix product BorIM-93S is used as the integrated matrix component in manufacture of low-cement refractory concretes of corundum and corundum-spinel structures. It is considerably facilitates the process of manufacture of concrete products and dry concrete mixes.

2

Refractory fillers are refractory grain materials used for manufacture of refractory items, mixes, mortars, repair of heat plants, heat insulation and other applications.

3

Kaolin is refractory raw material for manufacture of fire-clay bricks.

4

Alumino-silicate plasticized mortars are refractory mixes of fillers and bindining materials. Being admixed with water, they are used for laying of refractory mixes without plasticized
additives.

5

Refractory mortars are used for linings of various thermal units, for example steel-teeming ladles, rotary kilns, etc.

6

Ramming mix is intended for staffing backlashes in the working lining, which carried out by piece bricks in steel-teeming and intermediate ladles (between well/blowing-off blocks and the bottom, between the bottom and a wall, etc.)

7

Mixes are used for concrete mix and monolithic lining preparation

8

«BORCAST» castables are used for making monolithic lining and manufacture of refractory products.

9

«BORCAST» castables are used for making monolithic lining and manufacture of refractory products.

10

Castable silicon carbide refractory mixes  are used for making monolithic lining and manufacture of refractory products.

11

BORTHERM is used for monolithic heat-insulating lining during the furnace construction and repair.

12

Powders are refractory grain materials used for manufacture of refractory items, mixes, mortars, repair of heat plants, heat insulation and other applications.

13

Insulating filler ZTS is used for filling steel-teeming and intermediate ladle tapholes during continuous steel teeming.

14

High-alumina cements “CEMBOR-70” and “CEMBOR-73” are intended for manufacture of refractory middle-, low- or ultra-low cement concretes, stacked by vibration or self-spreading.

15

Reactive alumina GRT represents ready-to-use finely dispersed corundum powder.

16

Refractory concrete mixtures for aluminum industry are used for lining of melting furnaces, mixers, electrolysis unit edge and other areas of various thermal units used in aluminum industry.

17

Gunned castables of BORGUN series are used for working lining of intermediate ladles, converters and other thermal units.

Shaped refractories

1

Fire clay, mullite, mullite-corundum and corundum general purpose products are designed for laying of various thermal units with maximum operating temperature of 1200-1500 °C

2

Refractories are used for steel ladle lining and other termal units.

3

Refractory mullite silica products for anodes firing furnaces are intended to anodes firing  furnaces lining which are used in electrolysers for primary aluminum realization

4

Locking refractories are used for steel ladle casting

5

Refractories for steel bottom casting

6

Refractories for lining of cupola furnaces and other thermal units

7

Mullite spalling-resistant and mullite-corundum refractories

8

Mullite high-refractory refractories for laying of blast furnace bottom

9

Refractories are used for laying of air preheaters and hot blast lines of blast furnaces and other heat plants.

10

Bricks for coke oven batteries lining

11

Bricks for household furnace laying

12

Ceramic pipes for chimneys

13

Bricks are intended for hot-metal ladle lining and other thermal units.

14

Refractories are intended for lining of open-hearth checkers and other thermal units.

15

Refractories for Fired Boilers of Marine Vessels

16

Bricks are intended for lining of rotary kilns used in cement industry and other thermal units.

17

Mullite-silicate Refractories for Lining of Rotary Kiln Coolers

18

Periclase-spinel refractories are used for lining of rotary kilns used in cement industry.

19

Fire-clay Refractories for Blocking Layer of Electrolysis Units

20

Oxide-carbon Refractories and carbon-free refractories for working lining of steel ladles.

21

Bricks are used for lining of different zones of furnace.

22

Periclase-carbonaceous Back-up Briquets

23

Low-cement Thixotropic Castables

24

Ultra Low-cement Thixotropic Castables

25

Large-size blocks are intended for laying of bottom and walls of glass-melting furnace.

26

Refractories Based on Zirconium Dioxide

27

Thermally Insulating Refractories are used for laying of outside thermal insulating layer of various furnace elements.

28

Pipes

29

Monoblock Stoppers

30

Mullite Plugs

31

Nonswirl Nozzlles

32

Submersible Nozzles